Jump to content

- - - - -

JL AUDIO Launches Value-Driven Coaxial and Component Speaker Systems for OEM Replacement


JL Audio, an innovator in high-end audio solutions, launches a new series of coaxial and component speaker systems designed for installation into OEM (factory) speaker locations. The new C1 line of speakers covers all the key sizes with less models and is packed with features typically found at much higher price points.Careful consideration was taken during the development of the C1 line of speakers to ensure fitment in a wide range of today’s top selling models of vehicles. Frontal tweeter protrusion, mounting depth, and mounting diameter were all analysed for maximum installation flexibility. Additional adaptor rings (model specific) are included for bottom-mount applications and for compatibility with unique OEM speaker frame designs (GM, Honda, etc.) as well as oversized 6.75-inch openings.
Combine the attention to fitment with features like aluminium dome tweeters, oversized voice coils, and integrated lead wires; the result is unsurpassed value and performance.

“This year we set out to solidify JL Audio as a full-range speaker company. The introduction of C1 anchors our offering in the category and provides the first time buyer a taste of amazing sound from the factory speaker location” said Manville Smith, VP of Marketing.





Coaxial Models

C1-400x:
Continuous Power Handling: 35 Watts
Recommended Amp Power: 10-50 Watts per channel (RMS)
Efficiency: 84.5 dB @ 1W/1m | 90.5 dB @ 1W/0.5m
Sensitivity: 87.5 dB @ 2.83V/1m
Nominal Impedance: 4 ohm
Frequency Response: 64 Hz - 24 kHz ± 3 dB





C1-525x:
Continuous Power Handling: 50 Watts
Recommended Amp Power: 10-75 Watts per channel (RMS)
Efficiency: 89.0 dB @ 1W/1m | 95.0 dB @ 1W/0.5m
Sensitivity: 92.0 dB @ 2.83V/1m
Nominal Impedance: 4 ohm
Frequency Response: 54 Hz - 24 kHz ± 3 dB


C1-570x:
Continuous Power Handling: 50 Watts
Recommended Amp Power: 10-75 Watts per channel (RMS)
Efficiency: 90.5 dB @ 1W/1m | 96.5 dB @ 1W/0.5m
Sensitivity: 93.0 dB @ 2.83V/1m
Nominal Impedance: 4 ohm
Frequency Response: 40 Hz - 24 kHz ± 3 dB


C1-650x:
Continuous Power Handling: 50 Watts
Recommended Amp Power: 10-75 Watts per channel (RMS)
Efficiency: 90.5 dB @ 1W/1m | 96.5 dB @ 1W/0.5m
Sensitivity: 93.0 dB @ 2.83V/1m
Nominal Impedance: 4 ohm
Frequency Response: 48 Hz - 24 kHz ± 3 dB







C1-690x:
Continuous Power Handling: 60 Watts
Recommended Amp Power: 10-100 Watts per channel (RMS)
Efficiency: 91.5 dB @ 1W/1m | 97.5 dB @ 1W/0.5m
Sensitivity: 94.0 dB @ 2.83V/1m
Nominal Impedance: 4 ohm
Frequency Response: 39 Hz - 22 kHz ± 3 dB


C1-690tx:
Continuous Power Handling: 60 Watts
Recommended Amp Power: 10-100 Watts per channel (RMS)
Efficiency: 90.5 dB @ 1W/1m | 96.5 dB @ 1W/0.5m
Sensitivity: 93.0 dB @ 2.83V/1m
Nominal Impedance: 4 ohm
Frequency Response: 36 Hz - 24 kHz ± 3 dB
Component Speaker System Models


C1-650:
Continuous Power Handling: 50 Watts
Recommended Amp Power: 10-75 Watts per channel (RMS)
Efficiency: 90.5 dB @ 1W/1m | 96.5 dB @ 1W/0.5m
Sensitivity: 93.0 dB @ 2.83V/1m
Nominal Impedance: 4 ohm
Frequency Response: 48 Hz - 24 KHz ± 3 dB


C1-690:
Continuous Power Handling: 60 Watts
Recommended Amp Power: 10-100 Watts per channel (RMS)
Efficiency: 91.5 dB @ 1W/1m | 97.5 dB @ 1W/0.5m
Sensitivity: 94.0 dB @ 2.83V/1m
Nominal Impedance: 4 ohm
Frequency Response: 39Hz - 22 KHz ± 3 dB






C1-075ct:
Continuous Power Handling: 50 Watts
Recommended Amp Power: 20-50 Watts / ch. (RMS)
Efficiency: 91 dB @ 1W/1m | 97 dB @ 1W/0.5m
Sensitivity: 92 dB @ 2.83V/1m
Nominal Impedance: 6 ohm
Frequency Response: 4 kHz - 24 KHz ± 3 dB


C1-100ct:
Continuous Power Handling: 60 Watts
Recommended Amp Power: 20-60 Watts / ch. (RMS)
Efficiency: 91.5 dB @ 1W/1m | 97.5 dB @ 1W/0.5m
Sensitivity: 94.5 dB @ 2.83V/1m
Nominal Impedance: 4 ohm
Frequency Response: 3.6 kHz - 22 KHz ± 3 dB







Woofer Features:
Injection-molded, mineral-filled, polypropylene cone
Rubber, positive roll surround
1.0 in. (25 mm) diameter voice coil
1.2 in. (30 mm) diameter voice coil (C1-690x, C1-690tx, C1-690)
Flat, linear roll spider, with integrated lead wires (C1-400x)
Flat, Conex® spider with integrated lead wires
Ferrite magnet
Tweeter Features:
Edge-driven, silk-suspended aluminum dome
0.75 in. (19 mm) diameter diaphragm/voice coil
1.00 in. (25 mm) diameter diaphragm/voice coil (C1-690x, C1-690tx, C1-690, C1-100ct)
Ferrofluid cooling/damping
Neodymium magnet


Super Tweeter (C1-690tx):
Edge-driven, silk-suspended aluminum dome
0.75 in. (19 mm) diameter diaphragm/voice coil
Ferrofluid cooling / damping
Neodymium magnet


Crossover Features:
Natural roll-off, low-pass
2nd order, high-pass filter with inductor and electrolytic capacitor
Mixed order filter network (C1-690tx)
Inline Outboard Crossover Filter, with Advanced Tweeter Protection Circuitry (C1-690,







C1-650, C1-075ct, C1-100ct)
UK Suggested Retail Pricing: £49.99 - £129.99

Availability: Late July, 2017


0 Comments